分享到:

影响COREX工艺燃料消耗的因素

$F【编者按】$E$T11月24日,中国宝钢集团浦钢搬迁工程热负荷试车暨COREX出铁成功,开创  (本文共5页) 阅读全文>>

《宝钢技术》2011年06期
宝钢技术

COREX工艺燃料消耗影响因素分析及优化方向

目前COREX工艺需要努力研究和改进的方向是提高产能和生产作业率、降低燃料比和生产成本。以物料平衡和热平衡计算为基础,从理论上分析...  (本文共7页) 阅读全文>>

《南钢科技》1994年01期
南钢科技

COREX工艺介绍

1989年,世界上第一座工业熔融还原炼铁厂——COREX工厂在南非比勒陀利亚的伊...  (本文共5页) 阅读全文>>

《科学技术与工程》2017年21期
科学技术与工程

COREX熔融气化炉填充床内气固相间还原形式的影响因素研究

为提升COREX熔融气化炉内冶炼效率,根据COREX熔融气化炉填充床含铁炉料的还原特征,采用"历程"分割法,进行实验室高温还原模拟试验。对还原过程中含铁炉料还原...  (本文共7页) 阅读全文>>

《Journal of Iron and Steel Research(International)》2015年12期
Journal of Iron and Steel Research(International)

Estimation of Energy Consumption in COREX Process Using a Modified Rist Operating Diagram

Fuel consumption in the COREX-3000 process run in Baosteel is currently higher than the design index.Therefore,mass and heat balance equations for the COREX process were established using the basic principles included in the Rist operating diagram for blast furnace(BF)as a reference.Thermodynamic calculations were then used to modify the Rist operating diagram so that it was suitable for the COR...  (本文共7页) 阅读全文>>

《钢铁》2015年01期
钢铁

宝钢COREX煤压块技术分析

通过对比原料处理成本和技术可行性,得出粉煤压块是解决COREX炼铁工艺中粉煤再利用的最为便捷和有效的途径,并对宝钢COREX煤压块的工艺流程、工艺装...  (本文共4页) 阅读全文>>

权威出处: 《钢铁》2015年01期
《Journal of Iron and Steel Research(International)》2015年03期
Journal of Iron and Steel Research(International)

Establishment of a Static Model Based on Measured Heat Loss for COREX Process

The heat loss and its distribution are of great importance for the calculation and simulation of COREX process.Based on Baosteel COREX process,a method was applied to measure the heat loss of the furnace shell,the accessory equipments and the cooling water system.Then,a static model was established based on the measured heat loss of COR...  (本文共7页) 阅读全文>>