分享到:

COREX技术的新发展

COREX技术是世界上唯一已实现工业生产的熔融还原炼铁技术,到目前为止,先后已有4套COREX装置投  (本文共1页) 阅读全文>>

《冶金信息导刊》2007年04期
冶金信息导刊

Finex熔融还原技术的新发展

介绍了Finex的工艺特点、示范厂试验结果。分析了与...  (本文共4页) 阅读全文>>

《世界钢铁》2009年01期
世界钢铁

非高炉炼铁技术的发展方向和策略

基于国内外能源市场的变化和严峻形势,评述了直接还原和熔融...  (本文共8页) 阅读全文>>

《科学技术与工程》2017年21期
科学技术与工程

COREX熔融气化炉填充床内气固相间还原形式的影响因素研究

为提升COREX熔融气化炉内冶炼效率,根据COREX熔融气化炉填充床含铁炉料的还原特征,采用"历程"分割法,进行实验室高温还原模拟试验。对还原过程中含铁炉料还原...  (本文共7页) 阅读全文>>

《Journal of Iron and Steel Research(International)》2015年12期
Journal of Iron and Steel Research(International)

Estimation of Energy Consumption in COREX Process Using a Modified Rist Operating Diagram

Fuel consumption in the COREX-3000 process run in Baosteel is currently higher than the design index.Therefore,mass and heat balance equations for the COREX process were established using the basic principles included in the Rist operating diagram for blast furnace(BF)as a reference.Thermodynamic calculations were then used to modify the Rist operating diagram so that it was suitable for the COR...  (本文共7页) 阅读全文>>

《钢铁》2015年01期
钢铁

宝钢COREX煤压块技术分析

通过对比原料处理成本和技术可行性,得出粉煤压块是解决COREX炼铁工艺中粉煤再利用的最为便捷和有效的途径,并对宝钢COREX煤压块的工艺流程、工艺装...  (本文共4页) 阅读全文>>

权威出处: 《钢铁》2015年01期
《Journal of Iron and Steel Research(International)》2015年03期
Journal of Iron and Steel Research(International)

Establishment of a Static Model Based on Measured Heat Loss for COREX Process

The heat loss and its distribution are of great importance for the calculation and simulation of COREX process.Based on Baosteel COREX process,a method was applied to measure the heat loss of the furnace shell,the accessory equipments and the cooling water system.Then,a static model was established based on the measured heat loss of COR...  (本文共7页) 阅读全文>>